Motorola Micom 500E  HF commercial transceiver 500W with ALE

For sale is this complete and 100% working 500W Motorola Micom transceiver.  This is a “all in one box” radio.

This is a complete 500W transceiver, What is under the cover is:

• Lambda 1500W power supply 28vdc 50A for the linear amplifier, and 14vdc 30a for the radio
• Micom 125W 2ts radio transceiver (driving the internal 500W amplifier)
• Tadiran 500W linear amplifier with automatic band switching
• Control head connected to the radio via a 20ft control cable
• Desk top Motorola microphone

The radio is 1.5 to 30 Mhz HF SSB and AM (receives from 100KHz)

The radio can be used in frequency mode or channel mode (200 channels)

It has built in ALE (Automatic link establishment, see “HF link” on web)

Band can be scanned for signals at various speeds; I usually scan at 1Khz speed.

The system can be programmed via RS232

Motorola Micom programming software and RS232 cable included.

The system is rack mountable or table to use, it can be used as is but the control head with speaker and desk top microphone can be removed and located approx. 20ft away from the transceiver with included cable and connectors.

This radio passes full internal BIT test’

This system is Plug n Play, just connect a tuned or broadband antenna and you are on the air  with 500W!

perfect radio for CFARS, HFlink, DX, etc.

Please call if u have questions, I can also send more pdf info if requested

Photos here are with aluminum cover off so internal components and amplifier can be seen!

Due to its weight and size pick up is recommended at my QTH, can also be demonstrated at that time. Can be shipped at buyers cost,  buyer  chooses shipping method.

Please email me if you have any questions.  jc.daehler@gmail.com

73, JC Ve7oi