Network Communications Corp, USA

Part: 6610

Specifications:
Part: 6610
Manufacturer: Network Communications Corp, USA

Product Overview
This Model 6610 Network Probe is a hand held,
menu-driven system of instruments
designed to isolate and diagnose problems
occurring in data communications networks
and computer systems. Using varied protocols,
code sets, and environments.
It is capable of monitoring digital and/or
analog communications systems operating
at speeds up to 19,200 bits per second
in half or full duplex modes.

By operator selection, the Network Probe becomes
one of the following types of instruments:
1. Data Line Monitor/Emulator
2. Bit Error rate Tester (BERT & BLERT)
3. Buffered Asynchronous Terminal
4. RS232-C/V.24 Lead Status Monitor

It can be used to capture older PLC password exchanges
in order to decode and access protected programs.
This takes some advanced knowledge of the particular PLC
protection and ascii data transfer methods

Includes the OEM carrying case.
There are minimal signs of use.
Powers on after charging or when plugged in.

Detects and identifies RS232 Signals

Includes manuals as well as
1 Adapter cable and 9 volt charger

Features

Back-lit LCD
Lithium Bvattery memory back-up
Full ascii keyboard for entering hex, alphnumeric, and control characters.
Data Displayed in ASCII, EBCDIC,EBCD, 6BIT Transcode, IPARS, or hexadecimal during capture or post proccessing .
Multiple triggers to trap error conditions, character strings, timers, coun ters, and lead changes
]User selected counters and timers for measuring time intervals between triggers and counting events.
Up to 64K bytes of RAM with dynamic capture buffer size specification from 4K to 64K bytes
Maximum internally generated baud rates up to 64K bits per sec.
BSC to 19,200 bits per second, half duplex
Async to 19.2K bits per second, full duplex
SNA / X.25 to 56K bits per sec, half duplex
SDLC / HDLC tp 19.2K bits per sec, full duplex