Everything you need to set up an enterprise grade rack mounted server with managed networking. Dell PowerEdge R710, Cisco Catalyst 3750 Managed Network Switch, full sized steel rack, monitor, and keyboard. Plus a box of CAT5 cables. Rack includes one set of rails, two shelves for monitor + keyboard, one rack mounted 1U Ethernet cable organizer, two full length vertical cable organizers, and two full length power distribution bars that bolt to the back of the rack.

Whats Included?

• Dell PowerEdge R710
• Cisco Catalyst 3750 Managed Network Switch
• Full Size Steel Rack (made in Canada)
• Rails for Rack Mounting the Server
• Two Heavy Duty Rack Mounted Shelves for Monitor / Keyboard, modem, etc.
• Small Monitor and Keyboard
• Two full length power distribution bars that bolt to the back of the rack
• 1U Rack Mounted Cable Organizer
• 2x 8ft Vertical Cable Organizers
• Box of new CAT5 cables as a bonus gift

Dell PowerEdge R710 Specs:

• CPU: Dual Intel Xeon X5675 3.07 GHz (6-core, 12 threads each, 3.06-3.33 GHz)
• RAM: 36GB DDR3 ECC
• Storage: 2x 250GB SAS HDDs, 1x 557 GB SAS HDD (~1TB total, RAID configured)
• RAID Controller: PERC 6/i
• Power Supply: Dual redundant 870W PSUs for uninterrupted operation
• Networking: Quad-port Gigabit Ethernet
• iDRAC6 Enterprise for remote management
• Rails included

Cisco Catalyst 3750 Series Managed Network Switch Features:

• Dynamic Host Configuration Protocol (DHCP)
• Autonegotiation
• Dynamic Trunking Protocol (DTP)
• Port Aggeration Protocol (PAgP)
• Link Aggeration Protocol (LACP)
• Automatic Media-Department Interface Crossover (MDIX)
• Switching Database Manager
• Local Proxy Address Resolution Protocol (ARP)
• Multicast VLAN Registration (MVR)
• Unidirectional Link Detection Protocol (UDLD)
• VLAN1 Minimization
• Smart Multicast
• Internet Group Management Protocol (IGMP)
• Voice VLAN
• Cisco VLAN Trunking Protocol (VTP)
• Layer 2 Trace Route
• Trivial File Transfer Protocol (TFTP)
• Network Timing PRotocol (NTP)
• Private VLANs
• Access Control Lists (ACL’s)
• Secure Shell (SSH) Protocol
• MAC Address Notification
• Bridge Protocol Data Unit (BPDU)
• IGMP Filtering
• Cross-Stack EtherChannel
• IEEE 801.1s/w Rapid Spanning Tree Protocol (RSTP)
• Cisco Hot Standby Router Protocol (HSRP)
• Cross-stack QoS
• 802.1p Class of Service

Condition Notes:
Meticulously maintained, cleaned, and tested. No issues, boots perfectly.

Minor cosmetic wear from rack use, but fully functional with no broken parts.

Why This Server?
Ultra Reliable: Commercial chassis and hardware, dual power supplies, SAS HDD’s, bullet proof Xenon processors, error correcting RAM, quad gigabit Ethernet ports, efficient cooling. Designed for low RF noise, won’t interfere with your HF bands.

Remote Server Control: Use iDRAC6 to manage your R710 remotely.

Pickup / Delivery:
Server and managed switch can be shipped, but will be expensive due to size and weight. Rack is too large to be shipped and must be picked up. I can provide inexpensive delivery to most of the Columbia, Shuswap and Okanagan areas in British Columbia. The sever is located at my QTH in Salmon Arm, BC.

Trades and Strange Offers:
I’m currently in the market for a newer HF transceiver. I would certainly be willing to work out a deal for the server package in exchange for the right rig. You could end up with a server and some cash!