bencher

Popular!
bencher
$200

The underside of the BY-1 has 3 female and male disconnect terminals for ground and each of the DIT and DAH connections. HF transceivers equipped with either a 3.5mm (1/8″) or 1/4″ KEY input jack can be hooked right up with the EZ-1 kit. The EZ-1 has a 3 wire cable with the correct female terminals on one end for the BY-1, on the other end a 3.5mm connector with a 1/4″ adapter included. No soldering required. Plug the terminals onto the bottom of the key, plug the other end into the KEY jack on your HF rig.

Bencher BY-1 Features:

  • Set spring tensioning, no adjustments to make other than desired contact spacing
  • Light touch for sending clean code
  • Powder-coated cold rolled steel base
  • Weight 3 lbs.
  • Adjustment wrench held on under the base with tool holder

Verify Seller Callsign

  • Phone: 2042711596
  • Callsign: ve4nw
  • Item Condition: New
  • Payment Types Accepted: eTransfer
  • Shipping and Pickup: Will ship at cost.