Exploring the Frequencies: A Journey into AF, IF, and RF

In the chapter “Exploring the Frequencies: A Journey into AF, IF, and RF,” readers are taken on an educational voyage into the world of Audio Frequency (AF), Intermediate Frequency (IF), and Radio Frequency (RF) within ham radio operations. This section is far from a mere introductory overview; it delves deeply into the essential mechanisms that control and optimize these frequencies for effective transmission and reception. The chapter comprehensively covers topics ranging from the intricacies of Automatic Level Control in SSB transmitters to the complexities of digital signal processing, setting a solid foundation for understanding the multifaceted nature of radio communication.

  • A-005-007-001: Maintaining the peak RF output of a SSB transmitter at a relatively constant level requires a circuit called the:

    Automatic Level Control in SSB Transmitters: Question (A-005-007-001)

    The Crucial Role of ALC in SSB Transmission

    Question A-005-007-001 explores the necessity of a specific circuit in maintaining the peak RF output of a Single Sideband (SSB) transmitter. The correct answer, A. Automatic level control (ALC), underscores the importance of ALC in regulating the transmitter’s power output.

    In SSB transmission, maintaining a consistent signal level is paramount. Variations in voice amplitude, inherent to human speech, can lead to significant fluctuations in the RF output power. ALC plays a critical role in stabilizing these variations. It adjusts the gain of the RF amplifier, ensuring the transmitter operates within its optimal parameters and prevents overdriving, which could result in signal distortion and interference with other frequencies.

    ALC’s functionality is akin to a feedback control mechanism. It continuously monitors the output power and dynamically adjusts the gain to maintain the desired level. This process is vital for keeping the signal within the transmitter’s linear operating range, ensuring clarity and consistency. Furthermore, ALC is crucial for adhering to regulatory standards concerning signal strength and bandwidth.

    Understanding the operation and significance of ALC is fundamental for ham radio operators, especially those using SSB transmitters. It’s essential in ensuring that the natural amplitude variations in voice do not negatively impact the transmission’s quality or cause non-compliance with transmission standards. Thus, ALC is not just a component for maintaining signal quality, but it is also a key element in responsible radio operation.

    Parallels:

    1. Thermostat in Climate Control: ALC in an SSB transmitter can be compared to a thermostat in a climate control system. The thermostat adjusts heating or cooling to maintain a consistent temperature, much like ALC adjusts the gain to keep the signal level constant.
    2. Cruise Control in Vehicles: Similarly, cruise control in a car maintains a constant speed despite varying conditions, akin to how ALC maintains a consistent signal level despite variations in voice amplitude.

    Question Summary and Key Takeaways:

    1. Key Function of ALC: Automatic Level Control is crucial in stabilizing peak RF output in SSB transmitters.
    2. Regulating Signal Variations: ALC adjusts the gain of the RF amplifier to counteract voice amplitude variations.
    3. Prevention of Overdriving: By controlling the transmitter’s output, ALC prevents signal distortion and interference.
    4. Maintaining Linear Operation: ALC ensures the transmitter operates within its linear range, crucial for signal clarity.
    5. Compliance with Standards: ALC helps ham radio operators adhere to regulatory standards for signal strength and bandwidth.

    A-005-007-001: Maintaining the peak RF output of a SSB transmitter at a relatively constant level requires a circuit called the:

    Your score is

  • Question A-005-007-002: Speech compression associated with SSB transmission implies:

    Enhancing Signal Quality through Speech Compression: Question (A-005-007-002)

    Speech Compression in SSB Transmission

    Question A-005-007-002 focuses on the concept of speech compression in the context of Single Sideband (SSB) transmission. The correct answer is B. Full amplification of low-level signals and reducing or eliminating amplification of high-level signals. This answer highlights the key function of speech compression in SSB transmission, which is to improve the overall intelligibility and efficiency of the transmitted signal.

    Speech compression in SSB transmission is a technique that involves manipulating the dynamic range of the audio signal. This process entails amplifying the quieter parts of the speech while concurrently reducing the amplification of louder parts. The primary goal is to create a more uniformly audible and clear signal, which is especially important in radio communications where varying signal levels can significantly affect transmission quality. By compressing the dynamic range, speech compression ensures that the power and bandwidth of the transmitter are used more effectively, thereby improving the audibility of the transmitted speech even under less-than-ideal receiving conditions.

    In practical terms, speech compression is akin to a skilled orator who modulates their voice to maintain audience engagement, ensuring that both their whispers and shouts are equally intelligible to the listener. In ham radio, this equates to a more consistent and clear transmission, ensuring that the message is conveyed effectively, irrespective of the natural variations in the speaker’s voice. Understanding and implementing speech compression is therefore crucial for ham radio operators, particularly in SSB transmission, where the quality and clarity of voice transmission play a pivotal role.

    Parallels:

    1. Balancing Sound in Music Production: In music production, sound engineers often adjust the levels of different tracks to achieve a balanced mix, similar to how speech compression equalizes quieter and louder parts of speech.
    2. Volume Adjustment in Public Address Systems: Just as a public address system automatically adjusts the speaker’s volume for clarity, speech compression in SSB transmission balances the audio levels for consistent audibility.

    Question Summary and Key Takeaways:

    1. Purpose of Speech Compression: It enhances signal intelligibility by balancing the dynamic range of audio signals.
    2. Amplification Strategy: Speech compression involves amplifying quieter signals while reducing louder ones.
    3. Efficient Use of Resources: This technique ensures effective use of the transmitter’s power and bandwidth.
    4. Improved Audibility: Compression leads to more consistent and clear speech transmission.
    5. Relevance in SSB: Particularly crucial in SSB, speech compression maintains the quality and clarity of voice transmissions.

    A-005-007-002: Speech compression associated with SSB transmission implies:

    Your score is

  • A-005-007-003: Which of the following functions is not included in a typical digital signal processor?

    Digital Signal Processing Components: Question (A-005-007-003)

    Identifying Key Components in DSP Technology

    Question A-005-007-003 asks about the functions that are not typically included in a digital signal processor (DSP). The correct answer is B. Aliasing amplifier. This question is pivotal in understanding the core components of a DSP, which is integral to modern ham radio setups.

    A DSP is essential in processing digital signals, and it usually includes an Analog-to-Digital Converter (ADC), a Digital-to-Analog Converter (DAC), and various mathematical transformation capabilities. These components work together to convert analog signals to digital format, process them using complex algorithms, and then convert them back to analog signals. An ‘aliasing amplifier’ is not a standard component in this setup. In fact, aliasing is generally an undesirable effect in signal processing, often mitigated through the use of anti-aliasing filters before the ADC stage.

    Understanding DSP technology is crucial for ham radio operators, especially in the context of modern digital communication modes. DSPs enable sophisticated signal processing tasks like filtering, modulation, and demodulation, which are fundamental in achieving clear, reliable digital communication. The knowledge of DSP components and their functions allows for better utilization of digital modes in ham radio, enhancing overall communication capabilities.

    Parallels:

    1. Components in a Computer System: Just as a computer system requires a CPU, RAM, and storage to function, a DSP needs ADC, DAC, and mathematical algorithms to process signals.
    2. Kitchen Appliances for Cooking: Imagine DSP components as kitchen appliances; each has a specific role in preparing a meal, similar to how each DSP component contributes to signal processing.

    Question Summary and Key Takeaways:

    1. Core DSP Components: ADC, DAC, and mathematical transforms are essential in a DSP.
    2. Exclusion of Aliasing Amplifier: An ‘aliasing amplifier’ is not a standard component in DSPs.
    3. Function of ADC and DAC: These components convert signals between analog and digital formats.
    4. Role of Mathematical Transforms: DSPs use mathematical algorithms for advanced signal processing tasks.
    5. Importance in Digital Communication: Understanding DSP components is vital for effective digital communication in ham radio.

    A-005-007-003: Which of the following functions is not included in a typical digital signal processor?

    Your score is

  • A-005-007-004: How many bits are required to provide 256 discrete levels, or a ratio of 256:1?

    Binary Representation in Digital Systems: Question (A-005-007-004)

    Understanding Binary Representation for Discrete Levels

    Question (A-005-007-004 tackles the concept of binary representation in digital systems, specifically asking how many bits are needed to provide 256 discrete levels. The correct answer is C. 8 bits. This question is fundamental in understanding digital signal processing and its application in radio communications.

    In digital systems, binary representation is used to encode information, with each bit having two possible states (0 or 1). To represent 256 discrete levels, 8 bits are required, as each additional bit doubles the number of representable states. This concept is crucial in digital communication, including ham radio, where the clarity and precision of transmitted signals depend on the bit depth. A deeper understanding of binary representation helps ham radio operators in configuring and optimizing their equipment for digital modes, ensuring high-quality signal transmission and reception.

    Parallels:

    1. Shades in Digital Art: Each bit in digital representation is like a shade in digital art – more bits mean more shades, enabling finer detail and depth.
    2. Levels in a Video Game: Think of each bit as a level in a video game; with 8 bits, you unlock 256 different levels, offering a broad spectrum of experiences.

    Question Summary and Key Takeaways:

    1. Binary Representation: 8 bits are necessary to represent 256 discrete levels.
    2. Exponential Increase: The number of representable states doubles with each additional bit.
    3. Digital Signal Clarity: Bit depth is crucial for the clarity and precision of digital signals.
    4. Ham Radio Application: Understanding binary representation is essential for digital mode operation in ham radio.
    5. Equipment Configuration: Knowledge of bit depth aids in the optimal configuration of digital communication equipment.

    A-005-007-004: How many bits are required to provide 256 discrete levels, or a ratio of 256:1?

    Your score is

  • A-005-007-005: Adding one bit to the word length is equivalent to adding dB to the dynamic range of the digitizer:

    Dynamic Range and Bit Depth: Question (A-005-007-005)

    Linking Bit Increase to Dynamic Range in Digitizers

    Question (A-005-007-005) asks about the effect of adding one bit to the word length of a digitizer on its dynamic range. The correct answer is C. 6 dB. This question is essential for understanding the relationship between bit depth and dynamic range in digital systems, a key concept in digital signal processing for ham radio.

    Increasing the word length by one bit in a digital system enhances its dynamic range by 6 dB. The dynamic range, which refers to the ratio between the smallest and largest values a system can represent, is crucial in digital communication, including ham radio. A larger dynamic range allows for greater differentiation between signal levels, leading to improved signal clarity and reduced chances of signal distortion. This concept is particularly important in systems where maintaining high-quality signal representation is vital, such as in digital modes of ham radio communication. Understanding how bit depth impacts dynamic range assists ham radio operators in choosing the right equipment and settings to achieve optimal signal quality.

    Parallels:

    1. Photography: Adding bits to a digital image is like increasing the camera’s sensitivity in photography, allowing for capturing finer details in both shadows and highlights.
    2. Volume Control: Think of each additional bit as turning up the volume knob slightly, where each increment allows for a finer distinction in sound levels.

    Question Summary and Key Takeaways:

    1. Bit Depth Impact: Adding one bit increases the dynamic range of a digitizer by 6 dB.
    2. Dynamic Range Significance: A larger dynamic range allows for better differentiation of signal levels.
    3. Improved Signal Clarity: Enhanced dynamic range leads to clearer signals and reduced distortion.
    4. Crucial in Digital Communication: Understanding this relationship is vital in digital ham radio operations.
    5. Equipment Selection: Knowledge of dynamic range assists in selecting appropriate digital equipment.

    A-005-007-005: Adding one bit to the word length, is equivalent to adding ____ dB to the dynamic range of the digitizer:

    Your score is

  • A-005-007-006: What do you call the circuit which employs an analog to digital converter, a mathematical transform, a digital to analog converter, and a low pass filter?

    Components of a Digital Signal Processor: Question (A-005-007-006)

    Understanding DSP Circuitry

    Question (A-005-007-006) inquires about the circuit that employs an analog-to-digital converter, a mathematical transform, a digital-to-analog converter, and a low-pass filter. The correct answer is B. Digital signal processor. This question is crucial in understanding the fundamental components of a digital signal processor (DSP), widely used in modern ham radio setups.

    A DSP is a specialized processor used for manipulating digital signals. Its primary components include an Analog-to-Digital Converter (ADC) for converting analog signals to digital, a Digital-to-Analog Converter (DAC) for converting processed digital signals back to analog, and mathematical transforms for various signal processing tasks. Additionally, a low-pass filter is often used to remove high-frequency components from the signal, preventing aliasing. Understanding the composition and function of DSPs is critical for ham radio operators engaged in digital communications, as it underpins the ability to effectively manipulate and optimize signals for clear and reliable transmission and reception.

    Parallels:

    1. Music Production Studio: Think of a DSP as a music production studio, where various tools (ADC, DAC, mathematical transforms, low-pass filter) work together to produce a clear and refined audio track.
    2. Automated Factory Line: Imagine a DSP as an automated factory line, where different machines (components) each perform specific tasks to assemble the final product (processed signal).

    Question Summary and Key Takeaways:

    1. DSP Components: ADC, DAC, mathematical transforms, and low-pass filters are key components of a DSP.
    2. Signal Manipulation: These components work together to manipulate digital signals effectively.
    3. Preventing Aliasing: The low-pass filter in a DSP helps in reducing aliasing effects.
    4. Importance in Digital Modes: Understanding DSPs is crucial for operators using digital modes in ham radio.
    5. Optimal Signal Processing: Knowledge of DSP components enables optimal signal processing and communication.

    A-005-007-006: What do you call the circuit which employs an analog to digital converter, a mathematical transform, a digital to analog converter and a low pass filter?

    Your score is

  • A-005-007-007: Which principle is not associated with analog signal processing?

    Principles of Analog Signal Processing: Question (A-005-007-007)

    Exploring Analog Signal Processing Techniques

    Question (A-005-007-007) focuses on identifying the principle not associated with analog signal processing. The correct answer is B. Frequency division. This question is important for understanding the various techniques used in analog signal processing, a fundamental aspect of ham radio operations.

    Analog signal processing often involves techniques like compression, bandwidth limiting, and clipping. These methods are used to manipulate the signal in ways that enhance transmission quality or conform to specific requirements. Compression reduces the dynamic range of the signal, bandwidth limiting confines the signal within a designated frequency range, and clipping limits the signal’s amplitude. However, frequency division, which is the process of dividing a frequency into multiple separate bands, is not typically associated with analog signal processing. Understanding these techniques is crucial for ham radio operators, especially when dealing with analog signals, as it directly impacts the quality and effectiveness of communication.

    Parallels:

    1. Audio Mixing in Music: The techniques in analog signal processing can be likened to mixing audio in music production, where various adjustments (like equalization and compression) are made to achieve the desired sound quality.
    2. Editing a Photograph: Similar to adjusting brightness and contrast in a photograph, analog signal processing techniques modify the signal to improve its clarity and suitability for transmission.

    Question Summary and Key Takeaways:

    1. Analog Techniques: Compression, bandwidth limiting, and clipping are common in analog signal processing.
    2. Not Frequency Division: Frequency division is not a standard technique in analog signal processing.
    3. Signal Enhancement: These methods are used to enhance or modify the signal for better transmission.
    4. Importance in Ham Radio: Understanding these techniques is vital for operators dealing with analog signals.
    5. Quality and Effectiveness: Knowledge of analog processing techniques directly impacts communication quality and effectiveness.

    A-005-007-007: Which principle is not associated with analog signal processing?

    Your score is

  • A-005-007-008: Which of the following is not a method used for peak limiting in a signal processor?

    Peak Limiting Methods in Signal Processing: Question (A-005-007-008)

    Understanding Peak Limiting Techniques

    Question (A-005-007-008) explores the methods used for peak limiting in signal processing. The correct answer, B. Frequency clipping, identifies a method not typically employed for peak limiting. Understanding this is crucial in signal processing, especially for ham radio operators looking to maintain signal quality and integrity.

    Peak limiting is a technique used to prevent a signal from exceeding a certain level, ensuring that it doesn’t distort or cause interference. Common methods include RF clipping, compression, and AF clipping. RF clipping limits the radio frequency components, while AF clipping pertains to audio frequencies. Compression is a more sophisticated approach that reduces the dynamic range of the signal, making loud sounds quieter and soft sounds louder, which overall prevents excessive peaks.

    In contrast, frequency clipping is not a recognized method for peak limiting. It implies cutting off certain frequency components, which would alter the signal’s content rather than just its amplitude. This distinction is important for ham radio operators, as selecting the right peak limiting method directly affects the clarity and effectiveness of their transmissions.

    Parallels:

    1. Volume Control on a Sound System: Peak limiting can be compared to adjusting the maximum volume on a sound system to prevent distortion, similar to how compression and clipping prevent a signal from becoming too loud.
    2. Speed Limit on Roads: Just as speed limits prevent vehicles from going too fast for safety, peak limiting methods ensure signals don’t exceed levels that could cause distortion or interference.

    Question Summary and Key Takeaways:

    1. Methods of Peak Limiting: RF clipping, AF clipping, and compression are common peak limiting techniques.
    2. Exclusion of Frequency Clipping: Frequency clipping is not a standard method for peak limiting in signal processing.
    3. Importance of Method Selection: Choosing the appropriate peak limiting technique is crucial for maintaining signal quality.
    4. Compression Benefits: Compression reduces the dynamic range, balancing loud and soft parts of the signal.
    5. Significance for Ham Radio: Understanding peak limiting methods is key for effective and clear radio transmissions.

    A-005-007-008: Which of the following is not a method used for peak limiting, in a signal processor?

    Your score is

  • A-005-007-009: What is the undesirable result of AF clipping in a speech processor?

    Unwanted Effects of AF Clipping: Question (A-005-007-009)

    Consequences of Audio Frequency Clipping

    Question (A-005-007-009) delves into the undesirable outcomes of audio frequency (AF) clipping in a speech processor. The correct answer is D. Increased harmonic distortion. This question is significant for understanding the implications of excessive signal processing in ham radio communication.

    AF clipping occurs when the amplitude of an audio signal exceeds a certain threshold, leading to the ‘clipping’ of the signal’s peaks. This results in increased harmonic distortion, where additional frequencies are generated that were not present in the original signal. These harmonics can interfere with the clarity of the signal and may affect the intelligibility of the transmitted speech. In the context of ham radio, where clear communication is paramount, understanding and avoiding the adverse effects of AF clipping is essential.

    Harmonic distortion due to AF clipping can degrade the quality of the transmission and, in severe cases, lead to listener fatigue or misunderstanding of the message. Therefore, careful setup and adjustment of speech processors are crucial to prevent excessive clipping and preserve the natural quality of the transmitted audio.

    Parallels:

    1. Overdriving Speakers: Similar to how overdriving speakers causes distortion in music, AF clipping in a speech processor leads to harmonic distortion in radio communications.
    2. Excessive Brightness in Photographs: Just as overly bright areas in photographs lose detail and appear washed out, excessive AF clipping in radio signals results in the loss of audio fidelity and clarity.

    Question Summary and Key Takeaways:

    1. Impact of AF Clipping: Audio frequency clipping in speech processors leads to increased harmonic distortion.
    2. Creation of Unwanted Frequencies: AF clipping generates additional frequencies not present in the original signal.
    3. Effects on Signal Clarity: This distortion can interfere with the clarity and intelligibility of the transmission.
    4. Importance of Processor Adjustment: Careful adjustment of speech processors is required to avoid excessive clipping.
    5. Relevance in Ham Radio: Understanding the effects of AF clipping is crucial for maintaining high-quality radio communications.

    A-005-007-009: What is the undesirable result of AF clipping in a speech processor?

    Your score is

  • A-005-007-010: Which description is not correct? You are planning to build a speech processor for your transceiver. Compared to AF clipping, RF clipping:

    Comparison of RF and AF Clipping: Question (A-005-007-010)

    Distinguishing Between RF and AF Clipping in Transceivers

    Question (A-005-007-010) asks to compare RF clipping and AF clipping in the context of building a speech processor for a transceiver. The correct answer, A. Is easier to implement, is a statement incorrectly attributed to RF clipping when compared to AF clipping. This question underscores the differences in complexity and impact between these two types of clipping in ham radio systems.

    RF clipping refers to the limiting of the radio frequency signal’s amplitude, which, if not controlled, can lead to a form of distortion known as splatter, affecting other frequencies. AF clipping, on the other hand, deals with the audio frequency components, leading to harmonic distortion if overdone. RF clipping, or rather RF compression, which is typically what’s implemented in transceivers, is generally considered more challenging to implement effectively compared to AF clipping. This is due to the complexities involved in handling RF signals, which require careful consideration to avoid adverse effects on the entire transmission system.

    Understanding the distinctions between RF and AF clipping is crucial for ham radio operators, particularly those involved in building or modifying transceivers. It guides them in making informed decisions about implementing speech processors and understanding the implications of each method on their transmission quality and the broader radio frequency spectrum.

    Parallels:

    1. Balancing Sound in a Mixer: RF and AF clipping can be likened to balancing different instruments in a music mixer, where each adjustment has specific implications on the overall sound quality.
    2. Adjusting Brightness and Contrast in Photography: Similar to how adjusting brightness and contrast affects a photo’s quality, RF and AF clipping adjustments impact the clarity and quality of radio transmissions.

    Question Summary and Key Takeaways:

    1. RF vs. AF Clipping: RF clipping deals with radio frequency signals, while AF clipping concerns audio frequencies.
    2. Complexity in Implementation: Implementing RF compression is more complex and challenging compared to AF clipping.
    3. Impact on Signal Quality: Both RF and AF clipping have significant impacts on the overall quality of the transmitted signal.
    4. Potential for Distortion: Incorrect implementation can lead to splatter in RF clipping and harmonic distortion in AF clipping.
    5. Importance for Transceiver Building: Understanding these concepts is essential for those involved in building or modifying transceivers.

    A-005-007-010: Which description is not correct? You are planning to build a speech processor for your transceiver. Compared to AF clipping, RF clipping:

    Your score is

  • A-005-007-011: Automatic Level Control (ALC) is another name for:

    Alternate Names for Automatic Level Control: Question (A-005-007-011)

    Understanding ALC and its Alternate Terminology

    Question (A-005-007-011) explores the alternate names for Automatic Level Control (ALC). The correct answer, D. RF compression, points out that ALC is sometimes referred to as audio frequency compression. This question is important for understanding the terminology used in different aspects of signal processing in ham radio.

    ALC, or AF compression, is a key concept in radio transmission, particularly in managing the levels of audio signals. It functions by automatically adjusting the gain to maintain a consistent output level, thus preventing over-modulation and distortion. In the context of ham radio, where clear and consistent transmission is vital, understanding the various terms for ALC is crucial. It helps operators in setting up and troubleshooting their equipment, ensuring optimal performance.

    The term ‘AF compression’ highlights the process of reducing the dynamic range of the audio signal, which is essentially what ALC does. It compresses the louder sounds while boosting the quieter ones, leading to a more uniform audio level across the transmission. This knowledge is essential for ham radio enthusiasts in managing their transmission quality and in understanding the technical discussions in the ham radio community.

    Parallels:

    1. Volume Leveling in Audio Playback: ALC, or AF compression, in radio transmission is similar to volume leveling in audio playback, where the volume is automatically adjusted for a consistent listening experience.
    2. Irrigation System in Gardening: Just like an irrigation system adjusts water flow to provide consistent watering, ALC adjusts audio gain for consistent signal strength.

    Question Summary and Key Takeaways:

    1. ALC as AF Compression: Automatic Level Control is also known as audio frequency compression.
    2. Function of ALC/AF Compression: It adjusts the gain to maintain a consistent audio output level.
    3. Prevention of Over-Modulation: ALC is crucial in preventing over-modulation and distortion in transmissions.
    4. Dynamic Range Management: It helps in reducing the dynamic range of the audio signal.
    5. Relevance in Ham Radio: Understanding ALC and its alternate terminology is important for effective radio operation and communication within the ham radio community.

    A-005-007-011: Automatic Level Control (ALC) is another name for:

    Your score is

Synthesizing Signal Knowledge: Concluding Insights on AF, IF, and RF in Ham Radio

In “Synthesizing Signal Knowledge: Concluding Insights on AF, IF, and RF in Ham Radio,” the chapter brings together key learnings from the exploration of signal processing. The journey has encompassed understanding the vital role of Automatic Level Control in SSB transmitters, the importance of speech compression for signal clarity, and the complexities surrounding digital signal processors. Furthermore, it has shed light on the binary representation of data in digital systems and distinguished between RF and AF clipping. This chapter serves as an invaluable resource for ham radio enthusiasts, providing both theoretical and practical insights essential for optimizing signal quality and achieving clear, reliable communication in the world of ham radio.

5.7 Signal Processing – AF, IF, and RFs

Welcome to the Chapter Quiz!

Remember, each question is an opportunity to apply the QSL method and solidify your understanding of each topic. Take your time, think it through, and enjoy the challenge.

You need a score of 70% to pass the Quiz, but why not take a bit more time to review the course content and ‘shoot’ for 100%. Simply review the material again and re-take this Quiz.

Best of luck!

73 Don VE7DXE

 

1 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-001: Maintaining the peak RF output of a SSB transmitter at a relatively constant level requires a circuit called the:

2 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-002: Speech compression associated with SSB transmission implies:

3 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-003: Which of the following functions is not included in a typical digital signal processor?

4 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-004: How many bits are required to provide 256 discrete levels, or a ratio of 256:1?

5 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-005: Adding one bit to the word length, is equivalent to adding ____ dB to the dynamic range of the digitizer:

6 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-006: What do you call the circuit which employs an analog to digital converter, a mathematical transform, a digital to analog converter and a low pass filter?

7 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-007: Which principle is not associated with analog signal processing?

8 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-008: Which of the following is not a method used for peak limiting, in a signal processor?

9 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-009: What is the undesirable result of AF clipping in a speech processor?

10 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-010: Which description is not correct? You are planning to build a speech processor for your transceiver. Compared to AF clipping, RF clipping:

11 / 11

Category: Signal processing – AF, IF, and RFs

A-005-007-011: Automatic Level Control (ALC) is another name for:

Your score is

0%